Hi,
How can i program my own victim design to CW305 Artix FPGA i.e how to configure fpga with my own .bit file?
Regards Sirpa
Hi Sirpa,
You can either do this with a Xilinx platform cable, or from ChipWhisperer via USB as shown here:
https://chipwhisperer.readthedocs.io/en/latest/api.html#cw305-fpga-target
If you’re just getting started with the CW305 I recommend you have a look at this:
https://www.newae.com/post/whitepaper-cw305
Regards,
Jean-Pierre