How can we glitch using the UFO board? There is no input for the CW glitch output. I’ve been trying the fault101 with the XMega target board that comes attached to the CWLite. When I got it, both were separated, so I connected with cables. I’m not seeing a glitch at all so I wanted to try with a…

Answered here: [image] VCC glitching using CW1173 and CW308 ChipWhisperer Hardware Hello, You need to connect the glitch SMA connector (JP11) on the CWLite to the VOUT SMA connector on the CW308. To make power measurements and inject glitches at the same time, you need an…

Glitching with UFO board

Embedded Security Glitching

jpthibault February 7, 2022, 5:45pm 2

Answered here: