Glitching targets on CW308 target board

Hi

Could you advise on how to use the Chipwhisperer lite to glitch targets on the CW308 UFO target board? Cheers.

Hi Adom,

For clock glitching attacks, you can run through Tutorial A2. As long as your UFO target doesn’t have its own onboard clock, this should work as-is.

For voltage glitching, you can follow Tutorial A3. The only difference is that the UFO board doesn’t have separate Glitch and Measure connectors. You can plug the Glitch output directly into the VOUT connector on the UFO board, or you can use the SMA “T-joint” to connect both of them together.