Chipshouter with chipwhispere

1

Hello,

I am new to the Chipshouter and trying to use it for memory error injection, I am using chipwhisperer for my design module. I want to inject error on Chipwhispere but not sure how to do it. could you please help me with this?

Thanks

2

The ChipSHOUTER user manual explains how to trigger from ChipWhisperer.

You’ll be using ChipWhisperer’s glitch module, so be sure to go through our fault101 notebooks first to gain a good understanding of how that works.

Finally, understand that the cs.pulse parameters have no effect when ChipSHOUTER is triggered by the hardware trigger.

3

Thank you for replying!

I have ChipWhisperer Pro, and in the fault101 demos and experiments, ChipWhisperer Nano or Lite has been used. Is there any project or experiment where they used ChipWhisperer Pro for triggering ChipShouter.

I have my design functionally tested on modelsim and it is working. I want ti implement it on the FPGA CW305. Is there any guide that I can follow to do so?

4

The fault101 notebooks apply equally to CW-Pro. For the purpose of clock and voltage glitching, CW-lite and CW-pro are identical. On the fault101 landing page, we have a table that shows which hardware is required for which labs; “Group A HW” includes CW1200, which is the CW-Pro.